Dragon Shield Installation

Dragon Shield Logo

As of July 2024, Algas-SDI has acquired the Dragon Shield product line. This strategic acquisition strengthens Algas-SDI’s position in the gas market and provides Dragon Shield users world class support. We are committed to providing ongoing support for existing Dragon Shield customers. Please contact our dedicated LP Products customer service team for any questions related to Dragon Shield service, warrantee claims, spare parts, and/or options to upgrade your unit.

dragon shield acquisition
Dragon Shield Vaporizer<br />

Installation

Before proceeding with the vaporizer installation, please check local regulations for LPG equipment. The vaporizer installation must be done according to the figure below. Install the vaporizer on a level, firm, non-combustible base and firmly anchor it with the four screws in a location with good ventilation. Inlet and outlet pipeline dimensions must be proportional to the flow rate. If the vaporizer is covered, the regulator vent and relief valve must be piped away to an external location. Also, the first stage regulator shall be placed above the outlet of the vaporizer.

Vaporizer Functionality

When opening the isolation valves, the liquid will flow either by gravity or by pressure difference from the storage tank to the vaporizer heat exchanger. The flow will stop when the liquid level raises the float inside, which will automatically close the inlet valve.

When the burner is turned on, the heat it provided will initiate the liquid vaporization (or boiling) inside the heat exchanger, generating the sufficient amount of vapor to supply the system. As a consequence of this, the liquid level will decrease inside the exchanger, making the float drop, opening the inlet valve to replace any vaporized liquid.

In constant demand conditions, the inlet valve will remain partially open, replacing the liquid as it vaporizes. In variable demand conditions, the inlet valve will open and close as the liquid level varies inside the exchanger. The incoming liquid will be heated according to demand through the thermostat cycling the burner on and off.

IMPORTANT

Requirements for installations in the USA and Canada.

Canadian Installations: The vaporizer and piping shall be installed in accordance with Natural Gas and Propane Installation Code, CAN/CSA-B149.1, the Canadian Propane Storage and Handling Code, CAN/CSA-B149.2, and electrical components installed in accordance with the Canadian Electrical Code, CSA C22.1, Part I.

US Installations: The vaporizer shall be installed in accordance with Liquefied Petroleum Gas Code, NFPA 58, and electrical components installed in accordance with the National Electrical code, NFPA 70.

Dragon Shield Installation Diagram

Contact Algas-SDI

Dragon Shield Support,
Service, and Sales

Please fill in the form or give us a call with any questions regarding support, service, or sales of Dragon Shield or Algas-SDI LPG vaporizers.

US Headquarters

Call Us: +1.206.789.5410
(Monday - Friday; 7:30am - 4:30pm PST)
20224 66th Avenue South | Kent, WA 98032 USA

Global Support Center

Tel: +1.206.762.HELP (4357)

Additional LPG and Propane Vaporizers

At Algas-SDI our philosophy is that vaporizers should be safe, simple, and reliable. Our vaporizers are designed with decades of experience with LPG and various conditions all around the world. When you use an Algas-SDI vaporizer you are using the best!

Search Site

Looking for something? Search the Algas-SDI website.

Contact Us

Have a question? Need support? Please get in touch!